주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 39개에 영향을 미칩니다.

1 단계 번역 중

1 단계
Use the edge of a plastic opening tool to carefully flip up the retaining flaps on the two digitizer ribbon cable ZIF sockets. Be sure you are prying up on the hinged retaining flaps, not the sockets themselves.
  • Use the edge of a plastic opening tool to carefully flip up the retaining flaps on the two digitizer ribbon cable ZIF sockets.

  • Be sure you are prying up on the hinged retaining flaps, not the sockets themselves.

  • The retaining flaps are highlighted in red in the second picture.

Klappe die Haltebügel an den beiden ZIF-Sockeln der Digitizer Flachbandkabel vorsichtig mit einem Plastic Opening Tool um.

Achte darauf, dass du an den klappbaren Haltebügeln hebelst und nicht an den Sockeln selbst.

Die Haltebügel sind rot im zweiten Bild hervorgehoben.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.