Skip to main content

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 3 안내서에 영향을 미칩니다.

3 단계
If present, use a plastic opening tool to help remove the piece of tape covering the end of the dock connector cable. Use the edge of a plastic opening tool to carefully pry the dock connector cable's connector up from its socket on the logic board. Peel the dock connector ribbon cable off the rear panel.
  • If present, use a plastic opening tool to help remove the piece of tape covering the end of the dock connector cable.

  • Use the edge of a plastic opening tool to carefully pry the dock connector cable's connector up from its socket on the logic board.

  • Peel the dock connector ribbon cable off the rear panel.

Wenn vorhanden, musst du das Stückchen Klebeband, welches das Ende des Verbinders am Dockkabel bedeckt, mit einem Plastiköffnungswerkzeug ablösen.

Heble sorgfältig den Verbinder des Dockkabels mit der Kante des Plastiköffnungswerkzeugs aus seinem Sockel auf dem Logic Board.

Löse das Flachbandkabel zum Dockanschluss aus dem Gehäuse.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.