Skip to main content

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 3 안내서에 영향을 미칩니다.

3 단계
If present, use a plastic opening tool to help remove the piece of tape covering the end of the dock connector cable. Use the edge of a plastic opening tool to carefully pry the dock connector cable's connector up from its socket on the logic board. Peel the dock connector ribbon cable off the rear panel.
  • If present, use a plastic opening tool to help remove the piece of tape covering the end of the dock connector cable.

  • Use the edge of a plastic opening tool to carefully pry the dock connector cable's connector up from its socket on the logic board.

  • Peel the dock connector ribbon cable off the rear panel.

ドックコネクタケーブルの先端を覆っているテープがあれば、プラスチック製開口ツールを使って剥がします。

プラスチック製開口ツールの先端を使って、ロジックボード上のソケットからドックコネクタケーブルのコネクタを注意深く持ち上げます。

リアパネルからドックコネクタリボンケーブルを剥がします。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.