주요 콘텐츠로 건너뛰기

iPad 2 Wi-Fi EMC 2415 Heaphone Jack & Front Camera Assembly Replacement

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 3 안내서에 영향을 미칩니다.

1 단계 번역중

1 단계
iPad 2 Wi-Fi EMC 2415 Heaphone Jack & Front Camera Assembly Replacement: 0 단계, 이미지 3개 중 1개 iPad 2 Wi-Fi EMC 2415 Heaphone Jack & Front Camera Assembly Replacement: 0 단계, 이미지 3개 중 2개 iPad 2 Wi-Fi EMC 2415 Heaphone Jack & Front Camera Assembly Replacement: 0 단계, 이미지 3개 중 3개
  • Use the flat end of a plastic opening tool to flip up the retaining flap on the headphone jack and front-facing camera ribbon cable ZIF socket.

  • Be sure you are prying up on the hinged retaining flap, not the socket itself.

  • Run a plastic opening tool underneath the headphone jack and front-facing camera cable to free it from the adhesive attaching the cable to the rear panel.

  • Pull the headphone jack and front-facing camera ribbon cable straight out of its socket on the logic board.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.