6 단계 번역 중
6 단계
Asymmetry in screw placement
-
Based on the previous side, I assumed that disassembly of the 3.5mm jack side (to be referred to as "jack side" from this point) would be similar. I started by removing the surrounding ring, only to find out that there was no screws hidden underneath.
-
After prying for a while, I began to wonder if some type of plastic clips were holding the two sides together. Knowing the two sides were already held together with strong "rails", I decided to drill out the areas where these clips were believed to be located
귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.