주요 콘텐츠로 건너뛰기
영어
스페인어
9 단계
Position the computer face down, resting the CRT on an ESD mat or other soft surface. With a flathead screwdriver or coin, turn the colored latch counterclockwise on the access door. Pull the access door down to open.
  • Position the computer face down, resting the CRT on an ESD mat or other soft surface.

  • With a flathead screwdriver or coin, turn the colored latch counterclockwise on the access door.

  • Pull the access door down to open.

  • Push down on the plastic tabs to release the SDRAM module(s).

  • Carefully lift the SDRAM from the slot.

  • Remove installed SDRAM from the logic board before returning the logic board to Apple.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.