주요 콘텐츠로 건너뛰기
영어
스페인어

10 단계 번역 중

10 단계
Position the computer face down, resting the CRT on an ESD mat or other soft surface. With a flathead screwdriver or coin, turn the colored latch to open the access door. The antenna and AirPortCard will be visible when you open the access door. If the AirPort card is not installed, a clear protective antenna cap will be attached to the antenna.
  • Position the computer face down, resting the CRT on an ESD mat or other soft surface.

  • With a flathead screwdriver or coin, turn the colored latch to open the access door. The antenna and AirPortCard will be visible when you open the access door.

  • If the AirPort card is not installed, a clear protective antenna cap will be attached to the antenna.

  • Remove the AirPort Card by lifting the card straight up and out of the card guides and connector.

  • Disconnect the antenna from the small hole AirPort Card.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.