메인 콘텐츠로 스킵하기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 24 안내서에 영향을 미칩니다.

영어
프랑스어
2 단계
Opening the display on the 6s separates a thin strip of adhesive around the perimeter of the display. If you prefer to replace the adhesive, have a set of new adhesive strips ready before you continue. It's possible to complete the repair without replacing the adhesive, and you probably won't notice any difference in functionality.
  • Opening the display on the 6s separates a thin strip of adhesive around the perimeter of the display. If you prefer to replace the adhesive, have a set of new adhesive strips ready before you continue. It's possible to complete the repair without replacing the adhesive, and you probably won't notice any difference in functionality.

  • Apply a suction cup to the lower left corner of the display assembly.

  • Take care not to place the suction cup over the home button.

L'ouverture de l'écran sur le 6s sépare une mince bande d'adhésif autour du périmètre de l'écran. Si vous préférez remplacer l'adhésif, préparez un ensemble de nouvelles bandes adhésives avant de continuer.

Il est possible d'effectuer la réparation sans remplacer l'adhésif, et vous ne remarquerez probablement pas de différence dans les fonctionnalités.

Appliquez une ventouse sur le coin inférieur gauche de l´écran.

Prenez soin de ne pas placer la ventouse sur le bouton Home.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.