주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 22개에 영향을 미칩니다.

3 단계
Use a spudger or a clean fingernail to disconnect the front camera flex cable by prying it straight up from its socket on the logic board. Use a spudger or a clean fingernail to disconnect the front camera flex cable by prying it straight up from its socket on the logic board.
  • Use a spudger or a clean fingernail to disconnect the front camera flex cable by prying it straight up from its socket on the logic board.

スパッジャーの平面側先端や指の爪先を使って、基板上ソケットから正面カメラのフレックスケーブルをまっすぐ引き上げて接続を外します。

[* black] Use the flat end of a spudger,spudger or a fingernail,clean fingernail to disconnect the front camera flex cable by prying it straight up from its socket on the logic board.
[* black] Use the flat end of a spudger,spudger or a fingernail,clean fingernail to disconnect the front camera flex cable by prying it straight up from its socket on the logic board.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.