주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 7개에 영향을 미칩니다.

영어
스페인어
2 단계
Use the flat end of a spudger to disconnect the touchpad cable connector from its socket in the logic board. Slightly twisting the flat end of a spudger is an easy way to pry up the cable connector from these types of sockets. Be careful to only pry up against the connector, and not the logic board socket.
  • Use the flat end of a spudger to disconnect the touchpad cable connector from its socket in the logic board.

  • Slightly twisting the flat end of a spudger is an easy way to pry up the cable connector from these types of sockets.

  • Be careful to only pry up against the connector, and not the logic board socket.

Utiliza el extremo plano de un spudger para desconectar el conector del cable del panel táctil de su zócalo en la placa lógica.

Torcer levemente el extremo plano de un spudger es la forma fácil de levantar el conector del cabler de estos tipos de zócalos.

Ten cuidado de solo hacer palanca contra el conector y no en el zócalo de la placa lógica.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.