주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 7개에 영향을 미칩니다.

2 단계
Use the flat end of a spudger to disconnect the touchpad cable connector from its socket in the logic board. Slightly twisting the flat end of a spudger is an easy way to pry up the cable connector from these types of sockets. Be careful to only pry up against the connector, and not the logic board socket.
  • Use the flat end of a spudger to disconnect the touchpad cable connector from its socket in the logic board.

  • Slightly twisting the flat end of a spudger is an easy way to pry up the cable connector from these types of sockets.

  • Be careful to only pry up against the connector, and not the logic board socket.

スパッジャーの平面側先端を使って、基板中のソケットからtouchpadケーブルコネクターの接続を外します。

スパッジャーの平面側先端をわずかにひねるとケーブルコネクターはこのタイプのソケットから簡単に外すことができます。

コネクタのみに接触してください。基板のソケットには触らないでください。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.