주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 7개에 영향을 미칩니다.

영어
프랑스어
7 단계
Use the flat end of a spudger to pry the left speaker connector up and out of its socket on the logic board. Be sure to pry on the cable connector and not on the socket on the logic board. Prying on the socket may cause it to separate from the logic board. Gently fold the cable up and out of the way of the logic board.
  • Use the flat end of a spudger to pry the left speaker connector up and out of its socket on the logic board.

  • Be sure to pry on the cable connector and not on the socket on the logic board. Prying on the socket may cause it to separate from the logic board.

  • Gently fold the cable up and out of the way of the logic board.

Utilisez l'extrémité plate d'un spudger pour soulever le connecteur de haut-parleur gauche et le faire sortir de sa prise sur la carte mère.

Veillez à faire levier sur le connecteur de la nappe et non sur la prise sur la carte mère. Prendre appui sur la prise pourrait la casser et détacher de la carte mère.

Pliez délicatement la nappe vers le haut et hors de la carte mère.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.