주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 7개에 영향을 미칩니다.

10 단계 번역 중

10 단계
Use the tip of a spudger to pry the right speaker connector up and out of its socket on the logic board. Be sure to pry on the cable connector and not on the socket on the logic board. Prying on the socket may cause it to separate from the logic board. Gently fold the cable up and out of the way of the logic board.
  • Use the tip of a spudger to pry the right speaker connector up and out of its socket on the logic board.

  • Be sure to pry on the cable connector and not on the socket on the logic board. Prying on the socket may cause it to separate from the logic board.

  • Gently fold the cable up and out of the way of the logic board.

Verwende das flache Ende eines Spudgers, um den linken Lautsprecheranschluss aus seinem Anschluss auf dem Logic Board herauszuziehen.

Achte darauf, dass du den Hebel am Kabelstecker und nicht am Anschluss auf dem Logic Board ansetzt. Wenn du am Anschluss ansetzt, könnte er sich vom Logic Board lösen.

Falte das Kabel vorsichtig nach oben vom Logic Board weg und aus dem Weg.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.