주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

7 단계
Between the lock slider and headphone jack, insert a plastic opening tool into the seam between the front and back of the iPod.
  • Between the lock slider and headphone jack, insert a plastic opening tool into the seam between the front and back of the iPod.

  • You may find it easier to carefully flex the putty knife downward in order to create more of a gap for the opening tool, but be sure not to bend the corner of the rear panel!

Setze mit einem Plastic Opening Tool an der Spalte zwischen Vorder- und Rückseite zwischen dem Hold-Schalter und der Kopfhörerbuchse an.

Du kannst auch den Spachtel verwenden, um eine noch größere Lücke für das Plastic Opening Tool zu schaffen, aber achte darauf, dass du die Eckbereiche am hinteren Gehäuse nicht verformst.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.