주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

8 단계
Near the center of the display, carefully insert a metal spudger into the gap created by the plastic opening tool.
  • Near the center of the display, carefully insert a metal spudger into the gap created by the plastic opening tool.

  • It is easy to create a noticeable bump in the rear panel here that is difficult to repair. When prying the tab free, try to have the metal spudger pivot on the edge of the rear panel rather than bending the rear panel outward.

  • Using the metal spudger, disengage the single clip on the top of the iPod.

Setze in der Mitte der oberen Kante mit einem Metall-Spudger in der Lücke, die durch das Plastic Opening Tool entstanden ist, an.

Es kann leicht eine beträchtliche Beule im hinteren Gehäuse entstehen, die schwierig zu reparieren ist. Wenn du das Häkchen freihebelst versuche mit dem Metall-Spudger nach innen zu schwenken, anstatt das Außengehäuse nach außen zu biegen.

Löse mit dem Metall-Spudger den einzelnen Clip oben am iPod.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.