주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 8개에 영향을 미칩니다.

8 단계
Near the center of the display, carefully insert a metal spudger into the gap created by the plastic opening tool.
  • Near the center of the display, carefully insert a metal spudger into the gap created by the plastic opening tool.

  • It is easy to create a noticeable bump in the rear panel here that is difficult to repair. When prying the tab free, try to have the metal spudger pivot on the edge of the rear panel rather than bending the rear panel outward.

  • Using the metal spudger, disengage the single clip on the top of the iPod.

Führe nahe der Mitte des Displays vorsichtig einen Metallspudger in die Lücke ein, die durch das Kunststofföffnungswerkzeug erzeugt wurde.

Es ist einfach, hier eine merkliche Beule in der Rückwand zu schaffen, die schwer zu reparieren ist. Versuche den Metallspudger an der Kante der Rückwand zu schwenken, anstatt die Rückwand nach außen zu biegen.

Löse mit dem Metallspudger den einzelnen Clip oben am iPod.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.