주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 30개에 영향을 미칩니다.

1 단계 번역 중

1 단계
Unplug your iMac's AC cord along with any peripheral devices. Lay your iMac face-down on a soft, clean surface as shown.
  • Unplug your iMac's AC cord along with any peripheral devices.

  • Lay your iMac face-down on a soft, clean surface as shown.

  • Be sure there isn't any dirt or debris on your work surface, as it may scratch the glass panel on the front of your iMac. We recommend placing a towel between the iMac and the work surface.

  • Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.

  • All three screws will remain captive in the access door.

  • Remove the access door.

Lege deinen iMac mit der Scheibe nach unten auf eine saubere weiche Oberfläche.

Achte darauf, dass keinerlei Verunreinigungen auf der Oberfläche sind, die die Scheibe verkratzen oder beschädigen können. Am besten legst du ein sauberes weiches Tuch auf die Oberfläche.

Die Klappe ist mit drei Kreuzschlitzschrauben an der Unterseite des iMac befestigt. Drehe sie heraus.

Die Schrauben bleiben in der Klappe hängen.

Entferne die Klappe.

[* black] Unplug your iMac's AC cord along with any peripheral devices.
[* black] Lay your iMac face-down on a soft, clean surface as shown.
[* icon_caution] Be sure there isn't any dirt or debris on your work surface, as it may scratch the glass panel on the front of your iMac. We recommend placing a towel between the iMac and the work surface.
[* red] Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.
[* icon_note] All three screws will remain captive in the access door.
[* black] Remove the access door.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.