How to reduce ChiliCube noise level by replacing fans

영어

한국어

10 단계 번역중

10 단계

Prepare cables on new fan

The new fan in this guide is an Antec TriCool 92mm computer case Fan, with 3-speed switch. If you get another 92mm fan, just skip the instructions for the 3-way switch placement.
On this fan, I first attached the "dongle" that adapts the 3-pin connector on the fan to the 4-pin old-school molex connector. This is to help figure out which conductors are positive, negative, and speed sensor, because the new fans did not have color-coded conductors. (The speed sensor will not get used here)
Mark on you new fan which conductor is black (negative), and which is positive (red).
Once you have marked the cable, cut the 3-pin connector off.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.