How to reduce ChiliCube noise level by replacing fans

영어

한국어

14 단계 번역중

14 단계

Create spot for 3-way switch

Caution. By cutting this flange (and drilling the holes in the next step), you will defeating a safety feature of this unit. In the case of internal leaks, or a water spill by the filler neck, water may now not be captured by the deck, and would be able to flow down onto the electronics area.
If you wish to retain the water retainment safety feature, install the 3-way switches differently, or use switchless fans.
The 3-way switch will be positioned so that you can use a pencil point poked through the grill to change the setting after your ChiliCube is re-assembled.
You can use a dremel tool to cut part of the flange surrounding the deck. Position the switch and mark, it will be just behind the grill on the front-side of the cube when it is upright.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.