주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 14개에 영향을 미칩니다.

10 단계 번역 중

10 단계
Use a spudger to disconnect the ribbon cable labeled "6." If you have an iPhone 3GS, refer to the second picture and use a spudger to disconnect the ribbon cable labeled "7."
  • Use a spudger to disconnect the ribbon cable labeled "6."

  • If you have an iPhone 3GS, refer to the second picture and use a spudger to disconnect the ribbon cable labeled "7."

  • Be certain that the connectors on the ribbon cables are perfectly aligned with the sockets on the mother board before applying pressure. This may require a magnifying glass or jewelers' loupe.

Trenne das Flachbandkabel "6" mit einem Spudger.

Wenn du ein iPhone 3GS hast, schaue auf das zweite Bild und trenne mit dem Spudger das Flachbandkabel "7".

Stelle sicher, dass die Anschlüsse auf dem Flachbandkabel perfekt mit den Fassungen auf dem Motherboard ausgerichtet sind, bevor du Druck ausübst. Es kann hilfreich sein, dafür eine Lupe zu verwenden.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.