주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 14개에 영향을 미칩니다.

14 단계 번역 중

14 단계
Slide the logic board towards the dock connector and out of the iPhone.
  • Slide the logic board towards the dock connector and out of the iPhone.

  • When replacing the logic board after installing battery, connect the camera to the logic board before inserting it into the case. Then make sure to set the top section of the logic board (where the SIM tray is) in place before settling the rest of the board in place. This is important, as sometimes the SIM card slot will not align into place. Once the top section is in place, the bottom section can be maneuvered into place. You will know the logic board is correctly installed when the SIM tray is aligned with the opening in the iPhone case and the camera module seats neatly into its place.

Lasse das Logic Board in Richtung Dock Anschluss und aus dem iPhone heraus gleiten.

Wenn du das Logic Board wiedereinsetzt, nachdem du den Akku installiert hast, verbinde die Kamera mit dem Logic Board, bevor du es in das Gehäuse einsetzst. Stelle dann sicher, dass du die obere Seite des Logic Boards (wo sich das SIM Fach befindet) in Position bringst, bevor du den Rest des Boards zurechtrückst.

Das ist wichtig, da sich der SIM Karten Slot manchmal nicht richtig ausrichtet. Du weißt, dass das Logic Board in der richtigen Position sitzt, wenn das SIM Fach hinter der Öffnung im iPhone Gehäuse sitzt und das Kameramodul richtig an seinem Platz sitzt.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.