주요 콘텐츠로 건너뛰기
영어
스페인어
3 단계
Roll the new seal and stick it through the square trip lever holder and lasso the free end of the trip lever (the opposite end of the lever is attached to the flush lever outside of the tank).
  • Roll the new seal and stick it through the square trip lever holder and lasso the free end of the trip lever (the opposite end of the lever is attached to the flush lever outside of the tank).

  • Keeping the trip lever through large center hole of the new seal, pull the new seal in the reverse direction back through the square trip lever holder. Turn the trip lever holder as you do this to allow more space to ease the new seal back through.

Haz rodar la nueva junta y pégala a través del soporte cuadrado del tirador y sujeta el extremo libre del tirador (el extremo opuesto del tirador está unido a la palanca de descarga fuera del tanque).

Manteniendo el tirador a través del gran orificio central de la nueva junta, tira de la nueva junta en la dirección inversa hacia atrás a través del soporte cuadrado del tirador. Gira el soporte del tirador para permitir más espacio para facilitar la colocación de la nueva junta.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.