물건을 수리하세요 커뮤니티 상점

iMac Intel 21.5" EMC 2428 電源更換

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

안내서로 돌아가기
영어
중국어
3 단계
iMac Intel 21.5" EMC 2428 Power Supply Replacement: 0 단계, 이미지 2개 중 1개 iMac Intel 21.5" EMC 2428 Power Supply Replacement: 0 단계, 이미지 2개 중 2개

  • Carefully lift the power supply out of the outer case and rotate it to expose the cable lock as shown, minding the DC-Out and AC-In cables still attaching it to the iMac.

  • Disconnect the DC-Out cable by depressing the locking mechanism on the connector while you pull the connector away from its socket on the power supply.

  • Once the locking mechanism has cleared the socket, pull the DC-Out connector away from the power supply.

小心地將電源從機殼中取出並旋轉它以露出電纜接頭，如圖所示；注意DC-Out和AC-In電纜仍然連接在iMac。

在將電纜接頭從電源插座上拔出時，按下電纜接頭上的鎖定機構，來分開DC-Out電纜。

一旦鎖定機構與插座分離，就可將DC-In連接器拉離電源。

[* black] Carefully lift the power supply out of the outer case and rotate it to expose the cable lock as shown, minding the DC-Out and AC-In cables still attaching it to the iMac.
[* black] Disconnect the DC-Out cable by depressing the locking mechanism on the connector while you pull the connector away from its socket on the power supply.
-[* black] Once the locking mechanism has cleared the socket, pull the DC-In connector away from the power supply.
+[* black] Once the locking mechanism has cleared the socket, pull the DC-Out connector away from the power supply.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.