메뉴

설정

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 4개에 영향을 미칩니다.

안내서로 돌아가기
영어
독일어
2 단계
Insert a metal probe into the space above the ABXY buttons with the point touching the metal hinge. Push the hinge towards the center of the upper case. This will require a fair amount of force. Before and after images of the hinge location when looking at the back of the upper display are shown.

  • Insert a metal probe into the space above the ABXY buttons with the point touching the metal hinge.

  • Push the hinge towards the center of the upper case. This will require a fair amount of force.

  • Before and after images of the hinge location when looking at the back of the upper display are shown.

Setze eine Metallsonde in den freien Raum über den ABXY Tasten so ein, dass die Spitze das metallene Scharnier berührt.

Drücke das metallene Scharnier zur Mitte des oberen Gehäuses hin. Dafür brauchst du recht viel Kraft.

Die Bilder zeigen den Zustand des Scharniers vor und nach dem Verschieben, gesehen von der Rückseite des oberen Displays.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.