주요 콘텐츠로 건너뛰기

Reemplazo de la batería del iPad 2 GSM

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

영어
스페인어
3 단계
iPad 2 GSM Battery Replacement: 0 단계, 이미지 1개 중 1개
  • Before prying up the middle battery cell, use the edge of a plastic opening tool to lift the battery connector board away from the rear panel.

  • Do not excessively bend the battery connector board. Be especially careful when prying up around the post sticking up from the aluminum rear case.

Antes de hacer palanca en la celda central de la batería, utiliza el borde de una herramienta de apertura de plástico para levantar la placa del conector de batería y separarla del panel trasero.

No dobles excesivamente la Placa del conector de batería. Ten especial cuidado al hacer palanca alrededor de la publicaciónes que sobresale de la caja trasera de aluminio.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.