주요 콘텐츠로 건너뛰기

iPad 2 GSM Rear Camera Replacement

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 3개에 영향을 미칩니다.

2 단계
iPad 2 GSM Rear Camera Replacement: 0 단계, 이미지 3개 중 1개 iPad 2 GSM Rear Camera Replacement: 0 단계, 이미지 3개 중 2개 iPad 2 GSM Rear Camera Replacement: 0 단계, 이미지 3개 중 3개
  • Remove the following two screws:

  • One 3.3 mm Phillips screw

  • One 2.1 mm Phillips screw

  • Lift the metal retainer clip straight up from its recess in the rear panel.

  • If the camera comes up with the retaining clip, don't worry. Just separate the camera from the clip before reinstalling, so you can be sure to get the connector in the right place.

  • Be sure the small thermal pad is attached to the metal retaining clip as seen in the third picture when replacing the rear camera.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.