주요 콘텐츠로 건너뛰기
영어
스페인어

1 단계 번역 중

1 단계
Before diving into the assembly of your brain game, we should go over the procedure for through-hole soldering. Why is it called through-hole, you ask? You'll notice the circuit board has a bunch of holes in it, each with a copper trace on the underside of the board. The leads of each component are fed through these holes (hence through-hole) and soldered to the copper trace.
  • Before diving into the assembly of your brain game, we should go over the procedure for through-hole soldering.

  • Why is it called through-hole, you ask? You'll notice the circuit board has a bunch of holes in it, each with a copper trace on the underside of the board. The leads of each component are fed through these holes (hence through-hole) and soldered to the copper trace.

  • Through-hole soldering is generally regarded as the simplest form of soldering.

Insertar traducción aquí

¿Te preguntas por qué se llama orificio pasante? Notarás que la placa de circuito tiene un montón de agujeros, cada uno con un rastro de cobre en la parte inferior de la placa. Los cables de cada componente se alimentan a través de estos orificios (por lo tanto, orificios pasantes) y se sueldan a la pista de cobre.

La soldadura de orificios pasantes generalmente considerada la forma más simple de soldadura.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.