주요 콘텐츠로 건너뛰기
영어
스페인어
3 단계
We'll start with resistor R1 in your kit, which has yellow, purple, brown, and gold rings on it (more on what these colored rings mean later). Bend the leads of the resistor to 90o angles about 1.5 mm away from the body of the resistor. Bend the leads of the resistor to 90o angles about 1.5 mm away from the body of the resistor.
  • We'll start with resistor R1 in your kit, which has yellow, purple, brown, and gold rings on it (more on what these colored rings mean later).

  • Bend the leads of the resistor to 90o angles about 1.5 mm away from the body of the resistor.

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.