주요 콘텐츠로 건너뛰기
영어
이탈리아어
3 단계
We'll start with resistor R1 in your kit, which has yellow, purple, brown, and gold rings on it (more on what these colored rings mean later). Bend the leads of the resistor to 90o angles about 1.5 mm away from the body of the resistor. Bend the leads of the resistor to 90o angles about 1.5 mm away from the body of the resistor.
  • We'll start with resistor R1 in your kit, which has yellow, purple, brown, and gold rings on it (more on what these colored rings mean later).

  • Bend the leads of the resistor to 90o angles about 1.5 mm away from the body of the resistor.

Inizieremo con i resistori R1 nel tuo kit che hanno delle bande giallo, viola, marrone e oro (vedremo dopo il significato di queste bande).

Piega le gambe dei resistori a 90° a circa 1,5 mm dal corpo del resistore.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.