주요 콘텐츠로 건너뛰기
영어
이탈리아어

24 단계 번역 중

24 단계
Obviously, your solder creation needs to have a super sweet sound system ... or this speaker. Close enough, right? Note the + on the face of the speaker. When installing the speaker, be sure to line this + up with the + on the circuit board. Insert the leads through the holes located in the circle labeled LS, making sure to match up the positive terminals.
  • Obviously, your solder creation needs to have a super sweet sound system ... or this speaker. Close enough, right?

  • Note the + on the face of the speaker. When installing the speaker, be sure to line this + up with the + on the circuit board.

  • Insert the leads through the holes located in the circle labeled LS, making sure to match up the positive terminals.

Ovviamente, la tua creatura saldata merita un impianto audio con i controfiocchi… oppure questo altoparlante. Quasi lo stesso, no?

Nota il + sulla faccia dello speaker. Durante l'installazione, assicurati di allinearlo con il + sulla scheda logica.

Infila le gambe nei fori nel cerchio etichettato LS, assicurandoti di collegare i terminali positivi correttamente.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.