주요 콘텐츠로 건너뛰기
영어
이탈리아어

35 단계 번역 중

35 단계
Use a spudger to pry the metal rings on the battery terminals up so that they perpendicular to the battery terminals. These rings should be on the same end as the surface mount leads. If they are on opposite ends, the board is on backwards, and you'll need to unscrew the nuts, rotate the circuit board 180°, reinstall the nuts, and tighten the two screws.
  • Use a spudger to pry the metal rings on the battery terminals up so that they perpendicular to the battery terminals.

  • These rings should be on the same end as the surface mount leads. If they are on opposite ends, the board is on backwards, and you'll need to unscrew the nuts, rotate the circuit board 180°, reinstall the nuts, and tighten the two screws.

Usa uno spudger per fare leva sugli anelli metallici sui terminali della batteria in modo che siano perpendicolari ai terminali stessi.

Questi anelli dovrebbero essere sulla stessa estremità delle gambe saldate in superficie. Se sono sui lati opposti, la scheda è al contrario e dovrai svitare i bulloni, girare la scheda di 180°, reinstallare i bulloni e riavvitare le due viti.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.