주요 콘텐츠로 건너뛰기

Sostituzione scheda madre iMac Intel 21.5" EMC 2389

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 12개에 영향을 미칩니다.

영어
이탈리아어
14 단계
iMac Intel 21.5" EMC 2389 Logic Board Replacement: 0 단계, 이미지 2개 중 1개 iMac Intel 21.5" EMC 2389 Logic Board Replacement: 0 단계, 이미지 2개 중 2개
  • Be careful not to touch any solder joints on the back of the power supply. Capacitors may be charged enough to give you a dangerous shock.

  • Remove the following four screws:

  • One 9.3 mm T10 coarse-threaded screw

  • One 25 mm T10 coarse-threaded screw

  • Two 22 mm fine-threaded screws

  • Pull the upper right and lower left corners of the power supply away from the rear case to dislodge the mounting posts attached to the power supply's corners.

Stai attento a non toccare alcun contatto o punto di saldatura sul retro dell'alimentatore. I condensatori possono essere carichi a sufficienza per darti una scossa pericolosa.

Svita le seguenti quattro viti:

Una vite Torx T10 a filettatura grossa da 9,3 mm

Una vite Torx T10 a filettatura grossa da 25 mm

Due viti Torx T10 a filettatura fine da 22 mm

Tira dal case posteriore gli angoli in alto a destra e in basso a sinistra dell'alimentatore per liberare i supporti di montaggio negli angoli dell'alimentatore.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.