주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 23개에 영향을 미칩니다.

4 단계
Open the iPhone by swinging the home button end of the front panel assembly away from the rear case, using the top of the phone as a hinge. Several clips along the top edge of the front panel form a partial hinge. During reassembly, align the clips just below the top edge of the rear case. Then, slide the front panel upward until its top edge is flush with that of the rear case.
Opening up the phone
  • Open the iPhone by swinging the home button end of the front panel assembly away from the rear case, using the top of the phone as a hinge.

  • Several clips along the top edge of the front panel form a partial hinge.

  • During reassembly, align the clips just below the top edge of the rear case. Then, slide the front panel upward until its top edge is flush with that of the rear case.

Öffne das iPhone, indem du das Home Button Ende der Display Einheit vom hinteren Gehäuse wegklappst und dabei die Oberkante des Gerätes als Scharnier verwendest.

Einige Clips entlang der Oberkante der Display Einheit bilden ein nicht durchgängiges Scharnier.

Während des Wiederzusammenbaus, lege die Clips gerade unter der oberen Kante des hinteren Gehäuses an. Fahre dann mit der Display Einheit nach oben, bis seine obere Kante bündig mit der des hinteren Gehäuseteils ist.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.