주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 4개에 영향을 미칩니다.

7 단계
Peel up the six cable loops securing the antenna cables to the upper case. Gently pull the cable loops slightly out of the channel cut into the upper case one at a time. Use your spudger to open up the plastic loops as you de-route the antenna cables through them.
  • Peel up the six cable loops securing the antenna cables to the upper case.

  • Gently pull the cable loops slightly out of the channel cut into the upper case one at a time.

  • Use your spudger to open up the plastic loops as you de-route the antenna cables through them.

  • Repeat this for all of the retaining loops.

Löse die sechs Befestigungsschlaufen, die die Antennenkabel am oberen Gehäuse befestigen.

Ziehe die Befestigungsschlaufen nacheinander vorsichtig ein wenig aus den Einschnitten im oberen Gehäuse.

Öffne die Schlaufen mit einem Spudger, während du die Antennenkabel aus ihnen herausholst.

Wiederhole diesen Vorgang für alle restlichen Schlaufen.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.