주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 7개에 영향을 미칩니다.

8 단계
To avoid damaging its socket, do not lift the end of the SSD excessively. Pull the drive straight out of its socket and remove it from the logic board.
  • To avoid damaging its socket, do not lift the end of the SSD excessively.

  • Pull the drive straight out of its socket and remove it from the logic board.

  • When reinstalling the SSD, be sure it is properly seated before reinstalling its retaining screw.

Um Schäden am Anschluss zu vermeiden, hebe das Ende der SSD nicht zu stark an.

Ziehe das Laufwerk gerade aus seinem Anschluss heraus und entferne es vom Logic Board.

Wenn du die SSD wieder einsetzt, gehe sicher, dass sie richtig positioniert ist, bevor du die Schraube wieder eindrehst.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.