물건을 수리하세요 커뮤니티 상점

分离屏幕

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 25개에 영향을 미칩니다.

안내서로 돌아가기
영어
중국어
2 단계
Opening Procedure: 0 단계, 이미지 3개 중 1개 Opening Procedure: 0 단계, 이미지 3개 중 2개 Opening Procedure: 0 단계, 이미지 3개 중 3개

  • Apply a suction cup halfway up the heated side.

  • Be sure the cup is completely flat on the screen to get a tight seal.

  • While holding the iPad down with one hand, pull up on the suction cup with strong, steady force to create a gap.

  • Depending on the age of your device, this may be difficult. If you have trouble, apply more heat and try again.

  • Be careful to only lift the glass enough to insert an opening pick—any more and you risk cracking the glass.

沿加热位置， 将吸盘放在其正中间的位置。

确保吸盘已经完全贴合在屏幕没有空洞和气泡。

一只手将 iPad 固定在桌面上， 另一只手轻轻将吸盘提起来， 让屏幕和外壳留一条小缝。

只需要分离一条小缝，能够让插入一个小撬片就够了，过分用力会破坏你的屏幕。

-[* black] Carefully place a suction cup halfway up the heated side.
+[* black] Apply a suction cup halfway up the heated side.
[* black] Be sure the cup is completely flat on the screen to get a tight seal.
-[* black] While holding the iPad down with one hand, pull up on the suction cup to slightly separate the front panel assembly from from the rear case.
-[* icon_caution] Be careful to only lift the glass enough to insert an opening pick—any more and you risk cracking the glass.
+[* black] While holding the iPad down with one hand, pull up on the suction cup with strong, steady force to create a gap.
+ [* icon_note] Depending on the age of your device, this may be difficult. If you have trouble, apply more heat and try again.
+ [* icon_caution] Be careful to only lift the glass enough to insert an opening pick—any more and you risk cracking the glass.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.