주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 15개에 영향을 미칩니다.

영어
프랑스어

1 단계 번역 중

1 단계
Use the pointed end of a spudger to disconnect the display data connector from its socket on the logic board. Use the pointed end of a spudger to disconnect the digitizer cable connector from its socket on the logic board. When reconnecting these, press down from one end of the connector to the other. If you press in the middle of the connector, you may bend it, causing damage or a poor connection.
  • Use the pointed end of a spudger to disconnect the display data connector from its socket on the logic board.

  • Use the pointed end of a spudger to disconnect the digitizer cable connector from its socket on the logic board.

  • When reconnecting these, press down from one end of the connector to the other. If you press in the middle of the connector, you may bend it, causing damage or a poor connection.

Utilisez l'extrémité pointue d'un spudger pour déconnecter le connecteur des données de l'écran de sa prise sur la carte mère.

Utilisez l'extrémité pointue d'un spudger pour déconnecter le connecteur de la nappe de la vitre tactile de sa prise sur la carte mère.

Lorsque vous les reconnectez, appuyez vers le bas d'une extrémité du connecteur à l'autre. Si vous appuyez au milieu du connecteur, vous risquez de le plier, ce qui l'endommagerait ou le connecterait mal.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.