주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 3개에 영향을 미칩니다.

영어
프랑스어
7 단계
The home button is held in place by a thin, delicate, rubber gasket that is mildly adhered to the front panel. Slowly push the home button up and out of the display assembly to separate the gasket from the front panel.
  • The home button is held in place by a thin, delicate, rubber gasket that is mildly adhered to the front panel.

  • Slowly push the home button up and out of the display assembly to separate the gasket from the front panel.

  • Be careful to not push the gasket past its tearing point. If the adhesive is adequately heated, it will separate from the front panel with some gentle pressure.

Le bouton home est maintenu en place par un mince et fragile joint en caoutchouc qui adhère légèrement au panneau frontal.

Poussez lentement le bouton home vers le haut et hors de l'écran pour séparer le joint du panneau frontal.

Veillez à ne pas pousser le joint au-delà de son point de déchirement. Si l'adhésif est correctement chauffé, il suffira d'une légère pression pour le séparer du panneau frontal.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.