주요 콘텐츠로 건너뛰기

22 단계 번역 중

22 단계
Once the opening pick has lifted a corner of the logic board, you can insert a plastic card under the board. Slide the plastic card under the logic board, toward the top of the iPad, near the cameras.
  • Once the opening pick has lifted a corner of the logic board, you can insert a plastic card under the board.

  • Slide the plastic card under the logic board, toward the top of the iPad, near the cameras.

  • If the logic board adhesive provides too much resistance, reheat your iOpener and lay it on the rear case to soften the glue.

Wenn du mit dem Plektrum eine Ecke des Logic Boards angehoben hast, kannst du eine Plastikkarte unter das Board schieben.

Schiebe die Plastikkarte unter dem Logic Board in Richtung Oberkante bei den Kameras hin.

Wenn der Kleber des Logic Boards zu zäh wird, erwärme erneut den iOpener und lege ihn auf das Rückgehäuse, damit der Kleber wieder weich wird.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.