기기를 수리하세요

수리할 권리

상점

안내서로 돌아가기
영어
프랑스어
이전 단계 다음 단계

22 단계 번역 중

22 단계
Once the opening pick has lifted a corner of the logic board, you can insert a plastic card under the board. Slide the plastic card under the logic board, toward the top of the iPad, near the cameras.

  • Once the opening pick has lifted a corner of the logic board, you can insert a plastic card under the board.

  • Slide the plastic card under the logic board, toward the top of the iPad, near the cameras.

  • If the logic board adhesive provides too much resistance, reheat your iOpener and lay it on the rear case to soften the glue.

Une fois que le médiator a soulevé un coin de la carte mère, vous pouvez y insérer une carte plastique.

Faites glisser la carte plastique sous la carte mère, vers le haut de l'iPad, près des caméras.

Si l'adhésif de la carte logique résiste trop, réchauffez votre iOpener et placez-le sur la coque arrière pour ramollir la colle.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.