주요 콘텐츠로 건너뛰기
2 단계
Use a spudger to disconnect the upper antenna interconnect cable from its socket on the logic board. Lift the cable connector straight up from the board, do not pry on the socket itself.
  • Use a spudger to disconnect the upper antenna interconnect cable from its socket on the logic board.

  • Lift the cable connector straight up from the board, do not pry on the socket itself.

Löse mit dem Spudger das Verbindungskabel der oberen Antenne aus seinem Anschluss auf dem Logic Board.

Hebe den Stecker des Kabels gerade hoch, heble nicht am Anschluss selbst.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.