주요 콘텐츠로 건너뛰기

18 단계 번역 중

18 단계
Continue to slide the pick under the Lightning port cable until you reach the end of the logic board. Leave the pick in place to prevent the adhesive from re-adhering.
  • Continue to slide the pick under the Lightning port cable until you reach the end of the logic board.

  • Leave the pick in place to prevent the adhesive from re-adhering.

Schiebe das Plektrum weiter unter dem Kabel des Lightninganschlusses bis zum Ende des Logic Boards entlang.

Lasse das Plektrum stecken, damit sich der Kleber nicht wieder verbinden kann.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.