주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

10 단계 번역 중

10 단계
In the next two steps, you will install the hard drive into its bracket. When inserting the hard drive, be sure to place it in its bracket cable side up with the SATA connector closest to the bulge in the bracket seen in the third picture. Push the set screws into the grommets in the bracket and install the hard drive up into its bracket as seen in the second picture.
  • In the next two steps, you will install the hard drive into its bracket.

  • When inserting the hard drive, be sure to place it in its bracket cable side up with the SATA connector closest to the bulge in the bracket seen in the third picture.

  • Push the set screws into the grommets in the bracket and install the hard drive up into its bracket as seen in the second picture.

In den nächsten beiden Schritten wirst du die Festplatte in ihrer Halterung befestigen.

Achte beim Einlegen der Festplatte darauf, dass sie mit dem Kabel nach oben in die Halterung platziert wird und sich der SATA Stecker gleich neben der Ausbuchtung in der Halterung befindet, wie auf dem dritten Photo zu sehen ist.

Schiebe die Stellschrauben in die Durchführungen der Halterung und befestige die Festplatte so in der Halterung, wie im zweiten Bild zu sehen ist.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.