주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

영어
스페인어

12 단계 번역 중

12 단계
Install the second hard drive assembly into the outer case. Be sure that the mounting holes line up with the threaded holes in the outer case as seen in the second picture.
  • Install the second hard drive assembly into the outer case.

  • Be sure that the mounting holes line up with the threaded holes in the outer case as seen in the second picture.

  • When the logic board is installed, simply connect the second hard drive cable to the free socket on the logic board.

  • The second hard drive cable should lay flat between the two hard drives. If the second hard drive cable is placed on top of the first, the antenna plate will not reattach, and you could damage your cable.

Instale el segundo conjunto de disco duro en la carcasa exterior.

Asegúrese de que los orificios de montaje estén alineados con los orificios roscados de la carcasa exterior, como se ve en la segunda imagen.

Cuando la placa lógica esté instalada, simplemente conecte el segundo cable del disco duro al enchufe libre en la placa lógica. Asegúrese de que los orificios de montaje estén alineados con los orificios roscados en la carcasa exterior como se ve en la segunda imagen.

El segundo cable del disco duro debe quedar plano entre los dos discos duros. Si el segundo cable del disco duro se coloca encima del primero, la placa de la antena no se volverá a conectar y podría dañar el cable.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.