메인 콘텐츠로 스킵하기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

영어
스페인어

2 단계 번역 중

2 단계
Remove the two 8.2 mm T6 Torx screws securing the hard drive retaining bracket to the lower case. Use a spudger if the hard drive ribbon cable is firmly glued to the top of the drive. You might have to work slowly in order to not damage it. Lift the hard drive retaining bracket up and out of the computer.
  • Remove the two 8.2 mm T6 Torx screws securing the hard drive retaining bracket to the lower case.

  • Use a spudger if the hard drive ribbon cable is firmly glued to the top of the drive. You might have to work slowly in order to not damage it.

  • Lift the hard drive retaining bracket up and out of the computer.

  • Lift up the hard drive with one hand and use your other hand to disconnect the hard drive cable.

Retira los dos tornillos Torx T6 de 8,2 mm que sujetan el soporte de retención del disco duro a la carcasa inferior.

Usa un spudger si el cable plano de la unidad de disco duro está firmemente pegado a la parte superior de la unidad. Es posible que debas trabajar lentamente para no dañarlo.

Levanta el soporte de retención del disco duro hacia arriba y hacia afuera del ordenador.

Levanta el disco duro con una mano y usa la otra mano para desconectar el cable del disco duro.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.