메인 콘텐츠로 스킵하기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

영어
프랑스어

2 단계 번역 중

2 단계
Remove the two 8.2 mm T6 Torx screws securing the hard drive retaining bracket to the lower case. Use a spudger if the hard drive ribbon cable is firmly glued to the top of the drive. You might have to work slowly in order to not damage it. Lift the hard drive retaining bracket up and out of the computer.
  • Remove the two 8.2 mm T6 Torx screws securing the hard drive retaining bracket to the lower case.

  • Use a spudger if the hard drive ribbon cable is firmly glued to the top of the drive. You might have to work slowly in order to not damage it.

  • Lift the hard drive retaining bracket up and out of the computer.

  • Lift up the hard drive with one hand and use your other hand to disconnect the hard drive cable.

Retirez les deux vis Torx T6 8,2 mm par lesquelles le support de fixation du disque dur est fixé au boîtier inférieur.

Utilisez un spudger si le câble du disque dur est fermement collé sur le haut du disque. Il faut travailler avec prudence pour ne pas l'endommager.

Soulevez le support de fixation du disque dur hors de l'ordinateur.

Tenez le disque dur d'une main et de l'autre, débranchez le câble du disque dur.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.