주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

3 단계
If this is your first time removing an iPhone battery adhesive strip, refer to the video in the following step before beginning. Try to keep the strips flat and unwrinkled during this procedure; wrinkled strips will stick together and break instead of pulling out cleanly. Slowly pull one battery adhesive tab away from the battery, toward the bottom of the iPhone.
  • If this is your first time removing an iPhone battery adhesive strip, refer to the video in the following step before beginning.

  • Try to keep the strips flat and unwrinkled during this procedure; wrinkled strips will stick together and break instead of pulling out cleanly.

  • Slowly pull one battery adhesive tab away from the battery, toward the bottom of the iPhone.

  • Pull steadily, maintaining constant tension on the strip until it slips out from between the battery and the rear case. For best results, pull the strip at a 60º angle or less.

  • The strip will stretch to many times its original length. Continue pulling and re-grab the strip near the battery if necessary.

もしiPhoneのバッテリーの接着ストリップを外す作業が始めての方は、作業を始める前に次の手順のビデオを参照ください。

この作業中、接着ストリップを平らでシワのない状態に保ってください。綺麗に引っ張らないでシワが入ってしまったストリップは、絡まって破れてしまうことがあります。

iPhoneの下に向かって、ゆっくりとバッテリーの接着ストリップのタブをバッテリーから引っ張ります。

接着ストリップがバッテリーと背面ケースの間から抜け出るまで、一定の力加減を維持して接着ストリップを引っ張ります。接着ストリップを60度かそれ以下の角度で引っ張るのがベストです。

接着ストリップは本来の長さの何倍にも伸びます。引っ張り続けて、必要に応じてバッテリー付近のストリップを掴みなおしてください。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.