주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 15개에 영향을 미칩니다.

3 단계 번역 중

3 단계
Use the point of a spudger to lift the battery connector out of its socket on the logic board. Bend the connector cable up slightly to prevent it from making contact with the socket and providing power to  the phone. Bend the connector cable up slightly to prevent it from making contact with the socket and providing power to  the phone.
  • Use the point of a spudger to lift the battery connector out of its socket on the logic board.

  • Bend the connector cable up slightly to prevent it from making contact with the socket and providing power to the phone.

Mit der Spitze eines Spudgers kannst du den Batterieanschluss aus seinem Stecker auf dem Logic Board heben.

Biege das Anschlusskabel leicht nach unten, um zu verhindern, dass es mit der Steckdose in Berührung kommt und das Telefon mit Strom versorgt.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.