주요 콘텐츠로 건너뛰기
영어
프랑스어

12 단계 번역 중

12 단계
With the cover lid unscrewed we can push out the source of rotary motion and discover a small circular board behind the rear cover of the motor. Besides distributing power it also has three sensors (every fourth coil) for measuring the speed. 12 coils on the outer ring  make the 10 magnets on the center spindle go round and round–260 times per minute. The motor has a continuous output power of 180W and 7.3 Nm of torque.
hub gear motor
  • With the cover lid unscrewed we can push out the source of rotary motion and discover a small circular board behind the rear cover of the motor.

  • Besides distributing power it also has three sensors (every fourth coil) for measuring the speed.

  • 12 coils on the outer ring make the 10 magnets on the center spindle go round and round–260 times per minute. The motor has a continuous output power of 180W and 7.3 Nm of torque.

  • The three gears on the flip side are made of plastic to keep abrasion to a minimum.

Une fois le couvercle dévissé, nous pouvons extraire la source du mouvement rotatif et nous découvrons une petite plaque circulaire derrière le couvercle arrière du moteur.

En plus de distribuer la puissance, il dispose de trois capteurs (chaque quatrième bobine) pour mesurer la vitesse.

12 bobines sur le cercle extérieur font tourner les 10 aimants sur l'axe central 260 fois par minute. Le moteur dispose d'une puissance continue de 180 W et d'une couple de 7,3 Nm.

Les trois vitesses de l'autre côté sont fabriquées en plastique pour minimiser l'abrasion.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.