주요 콘텐츠로 건너뛰기
영어
이탈리아어
3 단계
Simply lift the gimbal out of the rubber mounts and fold back towards the front end of the Phantom. Use a small tool to press the clip holding in the smallest connector. I used the same tool to work the other two connectors up out of the gimbal. I had to work them from side to side a little to free them.
Remove the gimbal from the Phantom
  • Simply lift the gimbal out of the rubber mounts and fold back towards the front end of the Phantom.

  • Use a small tool to press the clip holding in the smallest connector.

  • I used the same tool to work the other two connectors up out of the gimbal. I had to work them from side to side a little to free them.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.